Perle Systems S-1110P manual Installing the SFP Fiber Module, Installing the Duplex Fiber Cable

Installing the SFP Fiber Module

SFP models only.

1.Locate the appropriate fiber module and insert the SFP into the opening on the front of the media converter.

2.Ensure the SFP module is properly seated. The release latch of the SPF fiber transceiver must be in the closed (up) position before insertion.

3.The SFP module may be inserted before or after applying power to the media converter.

4.Proceed with cable connections.

Installing the Duplex Fiber Cable

1.Locate a 1000Base-X compliant duplex (2 strands) fiber cable with appropriate connectors.

2.Connect the fiber cables from one media converter to the other media converter/switch/fiber device ensuring that the RX and TX are reversed (crossed) at the opposite end.

Installing the Simplex Fiber Cable

1.Locate a 1000Base-X compliant simplex (1 strand) fiber cable with appropriate connectors. Ensure that the TX wavelength matches the RX wavelength at the other end and the RX wavelength matches the TX wavelength at the other end.

2.Connect the fiber cable from one media converter to the other media converter/switch/fiber device.

16	Perle PoE/PoE+ 10/100/1000 Ethernet Media Converter
	Installation Guide