Operation
Status LED
The Perle PoE/PoE+10/100/1000 Rate converting Media converters have status LEDs located on the front panel of the unit.
PWR
On – Power is applied to the unit
Blinking (slow) – Loopback mode (one or both fiber interfaces are in loopback mode)
Blinking (fast) Power On failure. See LED Pattern to determine pattern combination and failure cause
LED Pattern |
|
|
| |
FDF | LKF | FDC | PSE |
|
Off | Off | On | On | SFP incompatible |
| All other LED patterns |
| Internal hardware | |
|
| failure | ||
|
|
|
| |
On – Full Duplex
Off – Half Duplex
LKF-1/2 (Status on Fiber Link 1/2)
On – Fiber link is present
Off – No fiber link present
Blinking (slow) – Fiber link appears functional – Fiber link has been brought down by Smart Link
Blinking (fast) – Fiber link up and receiving data
Perle PoE/PoE+ 10/100/1000 Ethernet Media Converter | 19 |
Installation Guide |
|
