Other Features, Auto-MDIX | Perle Systems S-1110PP, S-1110DP

Other Features

Auto-MDIX

Auto-MDIX (automatic medium-dependent interface crossover) detects the signalling on the 10/100/1000BASE-T interface to determine the type of cable connected (straight-through or crossover) and automatically configures the connection.

Pause (IEEE 802.3xy)

Integrated Pause signalling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed with data. The Perle media converter can generate and respond to Pause messages. If Auto negotiation is set to On, the media converter will advertise symmetrical and asymmetrical pause. If Auto negotiation is set to Off, the Pause receive and send will be disabled.

Perle PoE/PoE+ 10/100/1000 Ethernet Media Converter	21
Installation Guide

Image 21

Perle Systems S-1110PP, S-1110DPP manual Other Features, Auto-MDIX, Pause Ieee 802.3xy

Contents

1110P 1110PP 1110DP 1110DPP Installation Guide Port Models Overview Dual Copper / PoE DP Connector Mode Wavelength Port Models SFP Port Models SPF Auto-MDIX Jumper Settings Installation UTP copper Power Power Sourcing PinoutsPoE PoE+ Powering Options Jumper Settings DIP Switches BankBank Auto Negotiation copper Switch DIP Switch Settings BankLink Mode Switch Switch Position Copper Switch Position Fiber Port Fiber Fault Alert Switch Duplex copper Switch Switch Position Copper portIllustration of the FFA Speed copper Switch Auto Fiber Negotiation SwitchSwitch Fiber Position Mbps Up default Auto Down Off Switch Position 1 Switch Position 2 Type Loopback Fiber-1 Switch Loopback Fiber-2 Switch Switch Position Mode Redundant Primary Switch Fiber Redundancy Switch Dual fiber models only Installing the SFP Fiber Module Installing the Duplex Fiber CableInstalling the Simplex Fiber Cable Installing the Copper Cable Grounding the Media ConverterAttaching the Grounding Lug Attaching the Power cord strain relief clip Powering up the Perle Media Converter Operation Status LEDLED Pattern Error conditions Other Features Auto-MDIXPause Ieee 802.3xy General TroubleshootingNo connectivity Method No Power to the PD Fiber Optic Specifications Technical Specifications 1110PP-S1SC120U Min Ethernet Copper Cabling Requirements Fiber Cabling Requirements Compliance Information EN 55022, Class a EN 55024, Class a Laser Safety IEC Warranty / Registration Contacting Technical SupportCopyright