2.Attach the grounding lug to the chassis and secure with the grounding screw(s).
Attaching the Power cord strain relief clip
1.Feed the power cord through the opening in the power cord relief clip.
2.Attach the power cord relief clip to the chassis and secure with the provided screw.
3.Plug the power cord into the AC power connector at the rear of the chassis.
4.Plug the other end of the power cord into an appropriate power outlet.
Powering up the Perle Media
Converter
1.Connect the Perle supplied power adapter to the media converter.
2.Connect the power adapter to a power source.
3.Check that the PWR LED light is lit.
18 | Perle PoE/PoE+ 10/100/1000 Ethernet Media Converter |
| Installation Guide |
