OPERATING INSTRUCTIONS
DO NOT RUN DRY - FOR INDOOR USE ONLY
Fountain will come fully assembled and ready for use.
1)As with any electrical device, check the electrical cord for any tears, or damage before use.
2)Make sure the inline plug is connected. (No silver showing)
3)Remove the housing cover (lid) by placing your index fingers into the inset groves on either side of the lid. Lift up. Set the lid aside.
4)Lift up the reservoir and check to make sure the intake tube is properly inserted into the motor. (Fig. 1a &1b)
Fig. 1a
Fig. 1b
5)Insert the charcoal filter. The filter will fit into the two triangular slots in the center of the housing. The filter fits narrow side down and the black side faces the front of the fountain. The filter will slide easily into place.
NOTE: Rinse the filter thoroughly under cool water before placing into the housing. This will remove any loose charcoal dust, which is harmless. A small amount of charcoal dust may shed for the life of the filter. This is normal and not harmful to your pet. (Fig. 1c)
Fig. 1c
www.petsafe.net
