Petsafe 400-1255-19 manuel dutilisation Fountain Reassembly, Fountain Disassembly Cleaning, f

Inline Plug

FOUNTAIN DISASSEMBLY &

CLEANING

6)Next, remove the pump by disconnecting the inline plug (Fig. 2f), then lift it out of the fountain. Clean away any hair or food that may have accumulated around the flow control knob and the intake plate of the pump.

Fig. 2e

Fig. 2f

7)Clean the fountain parts with warm water and soap. You can also put the fountain in the dishwasher (not the pump). Remove the pump before placing in the dishwasher. It is recommended that you turn down the heat of the dishwasher if possible.

8)If you have troubles reaching certain spots or hard-to-reach corners, try using a cotton bud or purchase a Drinkwell® Cleaning Kit (3 Brush Kit).

9)Once the fountain is completely disassembled you will have 6 plastic parts.

FOUNTAIN REASSEMBLY

1)Replace the pump into its location in between the three posts on the right side of the fountain. Gently push down to engage the suction cups. (Fig. 3a & 3b)

Fig. 3a

Fig. 3b

www.petsafe.net