Pfaff 1183 6 Explanation of symbols

Explanation of symbols

6 Explanation of symbols

In this instruction manual, work to be carried out or important information is accentuated by symbols. These symbols have the following meanings:

Note, information

Cleaning, care

Lubrication

Maintenance, repairs, adjustment, service work

(only to be carried out by technical staff)

Contents

INSTRUCTION MANUAL PFAFF Industriesysteme und Maschinen AG Contents Page Page 1 Safety 1.01 Directives 1.02 General notes on safety 1.03 Safety symbols Caution 1.04 Important points for the user 1.05 Operating and specialist personnel 1.05.01 Operating personnel 1.05.02 Specialist personnel 1.06 Danger warnings Proper use Speciﬁcations PFAFF 1181, PFAFF Versions and subclasses 4Disposal of Machine Transportation, packing and storage Transportation to customer‘s premises Transportation inside the customer‘s premises Disposal of packing materials Storage 6 Explanation of symbols Controls On/off switch Keys on the machine head 7.03 Pedal Lever for lifting the presser foot 7.05 Feed regulator disk / Reverse feed lever Knee lever 7.07 Edge trimmer -731/01 7.08 Control panel Installation and commissioning 8.01 Installation 8.01.01 Adjusting the table-topheight 8.01.02 Adjusting the V-belttension 8.01.03 Mounting the upper V-beltguard 8.01.04 Mounting the lower V-beltguard 8.01.05 Mounting the spool holder 8.02 Connecting the plug-inconnections and earth cables 8.03 Commissioning the machine 8.04 Switching the machine on/off 8.05 Basic position of the machine drive unit 8.05.01 On machines with EcoDrive and control unit P40 ED 8.05.02 On machines with PicoDrive and control unit P40 PD2 On machines with control unit MD-4-95-220-CE Start inhibitor Mounting the start inhibitor 8.06.02 Checking the start inhibitor function 9 Preparation Inserting the needle 9.02 Winding the bobbin thread, adjusting the thread tension Removing / Inserting the bobbin case Inserting the bobbin case / Adjusting the bobbin thread tension Threading the needle thread / Adjusting the needle thread tension Care and maintenance Servicing and maintenance intervals 10.02 Cleaning the machine Topping up the oil tank 10.04 Oiling the edge trimmer -731/01 10.05 Parameter settings Parameter list for control unit P40 ED and P40 PD2 Parameter list for control unit MD-4-95-220-CE Table top cutout Block14diagramStromlaufpläne Block diagram 12.02 Block diagram PFAFF 1180 with control unit P40 PD2 12.03 Block diagram PFAFF 1180 with control unit MD-4-95-220-CE Wearing parts -731/01-8/11A 5,0 mm 91-069 595-04/002 -731/01-8/11B 3,5 mm