|
|
| Care and maintenance |
|
|
|
|
10 | Care and maintenance |
| |
10.01 |
| Servicing and maintenance intervals | |
|
|
|
|
|
| Clean ................................................................. | daily, more often if in continuous operation |
|
| Check oil level .......................................................................................................... | monthly |
|
| Oil the trimmer | once a week, more often if in continuous operation |
|
|
|
|
These maintenance intervals are calculated for the average running time of a single shift operation. If the machine is operated more than this, shorter intervals are recommended.
10.02 Cleaning the machine
The cleaning cycle required for the machine depends on following factors:
●Single or several shift operation
●Amount of dust resulting from the workpiece
It is therefore only possible to stipulate the best possible cleaning instructions for each individual case.
For all cleaning work the machine must be disconnected from the mains by switching off the on/off switch or by removing the mains plug! Danger of injury if the machine suddenly starts up .
To avoid breakdowns, the following cleaning work is recommended for single shift ope- ration:
● Swing out the cover plate and tilt back the sewing head.
● Clean the hook and hook compartment daily, more often if in continuous opera- tion.
Return the machine to its upright position using both hands! Danger of injury by crushing between the edge of the machine and the table top!
Fig. 10 - 01
31