Installation and commissioning

8.06

Start inhibitor

8.06.01

Mounting the start inhibitor

2

1

Fig. 8 - 07

●Set the machine into the table top.

●After loosening screws 2, set switch 1 so that it is activated when the sewing head is in an upright position.

●In this position tighten screws 2.

8.06.02 Checking the start inhibitor function

●Switch the machine on at the main switch and tilt back the sewing head.

●The error message "Er 0 16" (on MD-4-95-220-CE) or "Error 9 (on Eco- or PicoDrive) must appear on the control panel.

●If the message does not appear, check the setting of safety switch 2.

●After the sewing head has been returned to the upright position, the machine is ready for operation again.

26