Pfaff 1183 Parameter list for control unit MD-4-95-220-CE

Care and maintenance

Group	Parameter	Description	User lever	Setting range	Set value P40 ED	Set value P40 PD2
9	985	Switch on angle for thread trapper	B, C	0 -255	67	67
	986	Switch off angle for thread trapper	B, C	0 -255	206	206
	989	Thread trapper at beginning of seam	B, C	0 - 2	0	0
		1 = yes, 0 = no

10.05.02	Parameter list for control unit MD-4-95-220-CE
			Parameter	Description	Setting range	Set value
		1		Speed max.	50 - 9999	▲
		4		Speed for start backtackl	50 - 8000	1500
		5		Speed for end backtack	50 - 8000	1500
		40		Thread wiper	ON - OFF	ON
		46		Rotating direction of the motor	CW - CCW	CW
		47		Selected machine class	0 - 101	62
		61		Cutting speed 1	50 - 500	220
		81		Needle position 6 (start cutting signal 2)	0 - 360°	40°
		84		Needle position 5 (end cutting signal 1)	0 - 360°	90°
		85		Needle position 9 (start thread tension	0 - 360°	120°
				release/start thread catcher)
		87		Tension release after thread lever position at t.d.c.	0 - 1500ms	20ms
		179		Needle position 2 (take-up lever raised)	0 - 359°	83°
		181		Needle position 1 - needle lowered (192 = off)	0 - 255	250
		210		Switch on angle for thread trapper	0 - 359°	20°
		211		Switch off angle for thread trapper	0 - 359°	90°
		236		Machine version	0 - 20	0
				0 = 1183; 1 = 1181
				Further parameters see manual of the respective drive

34