Installation and commissioning

8.01.04 Mounting the lower V-belt guard

This step is eliminated for integrated sewing motors.

● Align belt-guard 1 in such a way that both the motor pulley and the V-belt run freely.

● Tighten screws 2.

A PFAFFmotor is shown in Fig. 8-04. If another motor is used, carry out this step according to the instructions in the motor instruction manual.

2

1

2

Fig. 8 - 04

8.01.05 Mounting the spool holder

● Mount the spool holder as shown in Fig. 8-05.

● Insert the spool holder into the hole in the table top and fasten it with the nuts enclosed.

Fig. 8 - 05

21