Installation and commissioning

8.03 Commissioning the machine

● Check the machine, especially the electrical leads, for any damage.

1

● Remove pin 1 of the oil reservoir 2

 

2

(Fig. 8 - 07).

The pin serves only to protect the machine from damage during transport and must not be used when sewing.

● Clean the machine thoroughly and oil it (see chapter 10 Care and maintenance).

● Have skilled personnel check if the machine can be operated with the available mains voltage

Fig. 8 - 07

Do not operate the machine if there is any discrepancy.

The machine may only be connected to an earthed socket!

Have home position of the machine drive verifi ed by certifi ed technicians before fi rst commissioning! Have settings carried out my technicians where required (see chapter 8.05)

8.04 Switching the machine on/off

●Switch the machine on (see Chapter 7.01, On/off switch).

23