Preparation

9.02 Winding the bobbin thread, adjusting the thread tension

+ -

4

5

1

7

 

 

3 2

6

Fig. 9 - 02

●Place an empty bobbin 1 onto bobbin shaft 2.

●Thread the bobbin in accordance with Fig. 9-02 and wind it anti-clockwise around bobbin 1 a few times.

●Switch on the bobbin winder while at the same time pressing bobbin winder spindle 2 and lever 3.

The bobbin fills up during sewing.

If the machine is only being used to wind the bobbin (without sewing), a bobbin case must be inserted in the hook! (Danger of damage to the hook).

●The tension of the thread on bobbin 1 can be adjusted with knurled screw 4.

●The bobbin winder stops automatically when bobbin 1 is full.

●Remove the filled bobbin 1 and cut the thread on knife 5.

If the thread is wound unevenly, loosen nut 6 and turn thread guide 7 accordin- gly. Retighten nut 6 after the adjustment.

28