21Automatic tuning of analogue programmes
This menu allows you to automatically search for all the analogue programmes available in your region.
Before you automatically search for all the analogue programmes, ensure the TV is in analogue mode. If it is in digital mode, press
the(Analogue / Digital) key to enter the analogue mode.
1Press the key.
Main |
|
Picture | Brightness |
Sound | Colour |
Features | Contrast |
Install | Sharpness |
| Colour Temp |
| Contrast+ |
| NR |
2Press the Î / ï key repeatedly to
select Install and the Æ / key to enter the Install menu.
Main
Picture | Auto Store |
|
Sound | Manual Store |
|
Features | Sort |
|
Install | Name |
|
| Fav. Program |
|
|
|
|
3Press the ï key to select Auto Store
and the Æ / key to start automatic searching of the channels. All the available TV programmes will be stored. This operation takes a few minutes. The display shows the progress of the search and the number of programmes found.
Auto Store
Program | 3 | |||
TV | 196 MHz | |||
|
|
|
|
|
IMPORTANT
To exit or interrupt the search before it
is completed, press the key. If you interrupt search during auto store, not all channels will be stored. For all channels to be stored, you need to do a complete auto store search again.
Note
ATS (Automatic Tuning System) feature
If the transmitter or cable network sends the automatic sort signal, the programmes will be numbered correctly. In this case, the installation is complete. If this is not the case, you can use the Sort menu to number the programmes to your preference.
ACI (Automatic Channel Installation) feature
If a cable system or a TV channel which broadcasts ACI is detected, a programme list appears. Without ACI broadcast, the channels are numbered according to your language and country selection. You can use the Sort menu to renumber them.
Note
You cannot change the Language or Country in Analogue mode. If you want to change the Language or Country, you have to exit Analogue mode and
enter into Digital mode to do so (refer to “Preferences”on page 18).
29