33.2Connect VCR or DVD recorder With a eurocable
1 | Connect the aerial cables | 1 and 2 |
| as shown. |
|
2 | Connect the eurocable 3 | as shown. |
3Press the
key on the remote control display Source list.
4Press the ï key repeatedly to select
EXT2 and press the Æ / 
key to confirm selection.
Connectors at rear of TV (facing backward)
| Connectors at |
Cable | rear of TV (facing |
downward) | |
1 |
|
2 | 3 |
Recorder
With the aerial cable only
1Connect the aerial cables 1 and 2 as shown.
2Tune in your recorder’s test signal and store the test signal under programme number 0.
(See “Manual tuning of analogue programmes”, page 30. See also the user manual of your recorder).
| Connectors at |
Cable | rear of TV (facing |
| downward) |
| 1 |
| 2 |
| Recorder |
33.3 Connect Decoder and VCR
Connect a eurocable 4 to your decoder and to the special euroconnector of your recorder. See also the user manual of your recorder.
Warning
Do not place your recorder too close to the screen as some recorders may be susceptible for signals from the display. Keep a minimum distance of 0,5 m from the screen.
Tip
You can also connect your decoder directly to EXT1 or EXT2 with a eurocable.
4
RecorderDecoder
46
