Philips 150P user manual Audio

150P Product Information

•Video dot rate

•Input impedance

-Video

-Sync

•Input signal levels

•Sync input signal

•Sync polarities

•Input Frequency

•Video interface

AUDIO

•Input signal levels

•Headphone out signal level

•Input signal connector

•Loudspeakers

80 MHz
75 ohm
2 kOhm
700m Vpp
Separate sync
Composite sync
Positive and negative
XGA Hsync	48- 60 KHz, Vsync 60 - 75 Hz (N.I.)
SVGA Hsync	35- 50 KHz, Vsync 56 - 75 Hz (N.I.)
VGA Hsync	31- 38 KHz, Vsync 60 - 75 Hz (N.I.)

Dual input: Both Analog (D-Sub) and DVI-D (Digital only) are available It can be switching via OSD selection.

0.4Vpp

32 ohm 50 + 50 mW 3.5mm mini jack

1 + 1 W stereo front firing

MICROPHONE

• Sensitivity	-51dB to -41dB
• Output impedance	600Ohm typical
• Directivity	-15dB at 180+ 20°
• Frequency range	500Hz~2KHz

OPTICAL CHARACTERISTICS

• Contrast ratio	250 (typ.)
• Brightness	210 nits (typ.)
• Peak contrast angle	6 o'clock
• White Chromacity	x: 0.281 y: 0.311 (at 9300° K) x: 0.312 y: 0.338 (at 6500° K)
	Upper >55 ° (typ.)
• Viewing Angle (C/R >5)	Lower >55° (typ.)
	Left >75 ° (typ.)
	Right >75 ° (typ.)

file:///E/manual/english/150P/product/product.htm (2 of 5) [12/13/1999 8:00:40 PM]