Philips 150P user manual Return to TOP

Installing Your USB Hub

4.Fix the USB Hub to the monitor by screwing

5.Do not tighten the fixing nut excessively (use fingers to tighten screws). If screwed too tight, the unit may not connect properly!

6.Plug-in the power cord and turn on the monitor.

7.The two ends of USB cable attached are different. Plug in the square end into the "upstream" connector of the USB Hub.

8.Plug-in the other end into the USB connector of the PC.

RETURN TO TOP OF THE PAGE

file:///E/manual/english/150P/install/usbhub/usb_inst.htm (4 of 4) [12/13/1999 8:01:05 PM]