HOWTO USE THE SOURCE TYPE CONTROL
he SOURCE TYPE control lets you change the TV input signal to ANTENNA or CABLE mode. It is important Tthat you know which type of signal to look for (Cable or Antenna).
Follow these steps for Digital Mode and Analog Mode.
Press MENU button on the remote control to display onscreen menu.
Press CURSOR 
or 
to scroll through the onscreen menu until you see Setup highlighted.
Press CURSOR 
or 
to display the SETUP menu features.
Press CURSOR 
or 
to scroll through the
setup features until you see Auto Channel Search highlighted.
Press CURSOR 
or 
to display the Auto Channel Search menu features. Use CURSOR 
or 
to highlight Source Type.
Press CURSOR 
or 
to toggle between Antenna and Cable.
When finished, press CLEAR button to clear the menu from the TV screen.
MAIN MENU
Exit
Picture
Setup
Parental Control
Time
SETUP
Go back
Auto Channel Search
Channel Edit & Name
Closed Caption |
|
Favorite List |
|
Language | Eng. |
Format | 4 : 3 |
Auto Vol. Level | On |
|
|
Auto Channel Search | |
|
|
Go back |
|
Source Type | Cable |
Start Search |
|
|
|
HELPFUL HINTS
MENU
When Cable is selected, channels 1 to 135 are available
in Digital Mode and channels 1 to 125 are available in
Analog Mode.
When Antenna is selected, channels 2 to 69 are available for both Digital and Analog Modes.
CLEAR
When you are in Digital Mode, channel numbers will be displayed as
Whether you selected either Cable or Antenna mode,
both Digital and Analog channels will be installed.
11
