Decoder (Analog TV only)
2 | Analog | - - - - - |
3 | Analog | - - - - - |
OK Set | Exit Back |
•To edit a channel decode.
►Press MENU + UP / DOWN button to select TV.
►Press OK + UP / DOWN button to select Channels.
►Press OK + UP / DOWN button to select Decoder.
►Press OK + UP / DOWN button to select the channel.
►Press OK button to set. A checked icon
displays.
Analog Ch Fine Tune (Analog TV only)
2 | - - - - - | 46.987 MHz |
3 | - - - - - | 119.985 MHz |
OK Adjust | Exit Back |
•Normally fi ne tuning is only necessary if reception is poor.
►Press MENU + UP / DOWN button to select TV.
►Press OK + UP / DOWN button to select Channels.
►Press OK + UP / DOWN button to select Analog Ch Fine Tune.
►Press OK + UP / DOWN button to select the channel you want to fi ne tune.
►Press OK button to the Fine Tune dialogue.
►Press LEFT / RIGHT to fi ne tune the frequency.
►Press OK button to save.
Appendix
Alphabet and numeric numbers mapping table on the Remote control
•To edit a channel number and name of a channel via the Remote control:
0:. @ 0
1:_ - 1
2:ABCabc2
3:DEFdef3
4:GHIghi4
5:JKLjkl5
6:MNOmno6
7:PQRSpqrs7
8:TUVtuv8
9:WXYZwxyz9
20
