Manuals / Fujitsu / Computer Equipment / Printer

Fujitsu DL6400Pro Tearing off continuous forms, Resetting the printer, To reset the printer

Models: DL6400Pro DL6600Pro

1 247

Download 247 pages 55.32 Kb

Page 213

Getting Acquainted with the Control Panel

plays the offset from a particular line in the range (–128 to +127).

The example here indicates an offset of +8/180 inch from the currently selected print line.

Tearing off continuous forms

To tear off continuous forms:

Form ↑		Tear off		Line ↑
feed		paper		feed


	Tear off paper
	and press any button


Form ↑		Tear off		Line ↑
feed		paper		feed

1.Make sure the printer has stopped printing. Press NEXT DISPLAY repeatedly until the menu shown at the left appears.

2.Press F2 to advance the forms to the tear-off edge. The control panel displays the prompt message shown at the left.

3.Tear off the continuous forms.

4.Press any button on the control panel to retract the continuous forms back to the original posi- tion. The original basic menu reappears.

Resetting the printer

To reset the printer:

Reset		Micro ↑		Line	↑
printer		feed		feed


RESET: Are you sure?
No				Yes


	Now resetting


Form ↑		Tear off		Line	↑
feed		paper		feed

1.Press NEXT DISPLAY repeatedly until the menu shown at the left appears.

2.Press F1. The confirmation message shown at the left appears.

3.Respond to the confirmation message. Press F3 to reset the printer. If you do not want to reset the printer, press F1.

After the printer is reset, the original basic menu reappears.

E-8	User’s Manual

Image 213

Fujitsu DL6400Pro Tearing off continuous forms, Resetting the printer, To tear off continuous forms, To reset the printer

Contents

MANUALUSER’S 24-wire dot matrix printers User’s Manual User’s Manual Manufacturers Declaration of Conformity Trademark Acknowledgment User’s Manual User’s Manual Contents 10-1 Changing Head Gap Adjustment Options12-1 11-1IN-1 Image and graphics reproduction IntroductionPackage ContentsFunctions PartsInside Or continuous forms width Lists the printer parts and functionsRecommended Setting Up the Printer Removing Stopper CushionCheck that the jam removal lever is locked Installing the Paper Guide Insert the platen knob and align it with the gear teeth Installing the Platen KnobPlug the power cord into an outlet Connecting the Power CordConnecting the Interface Cable User’s Manual Choosing a Cassette Installing the Ribbon CassettePreparing the Ribbon Cassette Installing the Ribbon Cassette Close the top cover of the printer Removing the Ribbon Cassette Lift the reverse guide and remove the old ribbon Replacing the SubcassettePaper tape Knob Lock tabs B Turn on the printer power switch Loading PaperLoading Continuous Forms Front Loading Continuous Forms Front Tractor pins Paper holders Tractors Continuous forms Close the front cover of the printer Lower the cut-sheet trayIndicator Loading Forms Rear CuttingForms Turn on printer power Raise the paper guide. See Installing the Paper Guide onLoading Cut Sheets Align the cut-sheet guide with the reference point Open the front trayCut-sheet guide Cut sheet Printing on Cut Sheets Cut sheet Continuous forms Returning to Continuous Forms Operating the Printer UsingControl Panel OnlineFront Tractor FrictionRear Tractor LockedLoad LF/FFFont LockTear OFF MenuPaper Path Online + Tear OFFAlarm PowerOnline *2 Friction *2Next Display Online *1Turning Printer Power On Off Test Printing Test Printing Test printing sample Demonstration Pattern Printing Demonstration pattern Sensor Detection User’s Manual Clearing Paper Jams Continuous Forms Front Top cover Print head Paper thickness lever Cut Sheets Cut Sheets User’s Manual Shows the size range for continuous forms Paper SpecificationsContinuous Forms Parts do not separate or Become misaligned easilyMisaligned Types of binding Single-sided zigzag spot gluing Combination of the other two30 mm Printing Area Size in mm Remarks Type Number Ream weight in g/cm Front Paste here FrontSide Labels Ambient temperature 40C Or more25.4 Formats Recommended label formats Label arrangement Preprinting PrecautionsLeave an interval of 8 mm 0.3 in or greater Unit mm Miscellaneous Overview Setup ModeChapter Organization Activating Setup Mode Initial setup mode printout Mode Using SetupUsing Setup Mode Setup mode summary Exit setup mode, saving the new font and spacing Printing a List of Options Default settings at shipment MENU1 Emulate Setting Required OptionsChanging MENU1 MENU2 Options DPL24C+ XL24EESC/P2 Letter QualityReport DraftNormal CHAR-WTimes CHAR-HNone AttribItalics CondnsdTOP-MRG USA LangugeGerman SwedishPG-DHN ELOT928LATIN-P ISO-LTNSET CHR-SETItalic GraphicDisable EnableCR-CODE CR only CR & LFEnd-of-line wrap. Causes a carriage return plus a line Rghtend WrapFeed OVR-PRTChange other MENU1 or MENU2 options as required Select MENU1 or MENU2ADJUST, or Config Default does not reset options handled by HardwareHardware ChangingBIT WORD-LGBuffer 2KBYTE2XON/XOF SPACE1DTR REV-CHLPrinter detects CD Printer ignores CDChanging Print Adjustment Options Cntfine CNT-ORGCUT-ORG CutfineFcntadj RcntadjCUT-ADJ CNT-ORG Tearoff Manual Changing Conﬁguration OptionsAuto Tearpos VisibleCutload Auto TEAR-EN SECButton LoadtimALL SetupCONT-PE TractorTearoff Manual Auto Amount Changing Head Gap Adjustment OptionsPLY PLY POS.A POS.B POS.C POS.D ManualSelect SAVE&END Resetting Default ValuesUsing Diagnostic Functions Test printing SELF-TST Hex dump printing HEX-DUMP Sample hex dump Checking vertical print alignment V-ALMNT Bars offset to the left Correct vertical printing alignment You can also exit setup mode to exit V-ALMNTFlowchart in -6 shows the setup mode for the Fujitsu Setup ModeReference Listed for IBM Proprinter XL24E and Epson ESC/P2 emulationsHardwre Adjust Config GAP-ADJ LF code AGMPerforming Online Setup Print head Ribbon cassette Correct continuous forms loading User’s Manual To troubleshoot printer problems, follow the flowchart TroubleshootingTroubleshooting Inspection Maintenance Daily Inspection and Maintenance11-2 Specifications Vertical ⋅Conﬁguration body Horizontal Face Draft Quality Printer Specifications Printer specifications Parallel two pins Dimensions Aptc Consumables and OptionsD86B-1138-C353 for DL6600 Pro D86B-1138-C359 for DL6600 ProUser’s Manual Command Sets Fujitsu DPL24C DC2 Condensed characters offESC T Select underline typeESC M Space Backspace Carriage return Elite 12 cpiPica 10 cpi ESC PESC LF Line feed Reverse line feedForm feed 255 ESC J n255 ESC VT n Horizontal tab executionSet right margin 0 ≤ n ≤ ESC Q n ESC ODC1 CanDC3 ESC =Select font m with source and style set by n ESC % m nBits 0 and 1 Font device selection Resident font255 0 ≤ n2 ≤ Select character spacingn/360 inch, font attributesFixed 10 cpi 12 pt ESC NUL m n Bits 4 and 5 Speciﬁes the quality of characters to be regIstered Cut-Sheet Feeder Control EAN Codabar nw-7 EANSound bell Enable paper-out sensorBEL Ignore the paper-out sensorBOLDFCE, Pica 10, Corresp Cour 10, Prstg 12, ComprsdDownld 0, Downld ESC % LETTER, REPORT, DraftSHADOW, Bold NONE, ITALICS, CondnsdESC E ESC F ESC G ESC HNO-SLSH, Slash DC1/DC3 ENABLE, DisableCR-ONLY, CR & LF LF-ONLY, LF & CRDC4 Unchanged Normal Double Single M4 controls character widthUnchanged Normal Double Set line spacing to 7/72 inch Space Backspace Carriage return Elite characters onSet line spacing to n/216 inch 0 ≤ n ≤ ESC 3 n ≤ t1 ≤ 255, 0 ≤ t2 ≤ 255, t3 = 0, t4 = 180 orESC B NUL ESC D NULESC Q # ESC EM ESC EM EESC EM R Underline on or off ESC n On n = 1, off n = ESC GESC n 1 n Select lineSet pica Space Backspace Carriage return Set eliteESC c n1 n2 Line feed Form feedESC D 127 ESC C n Set page length to n inches 1 ≤ n ≤ ESC C NUL n ESC O255 0 ≤ ESC t nDelete character DELESC % n Point ESC X m n 1 nESC * m n 1 n 2 data Print raster image graphicsESC @ Enter online setup mode ESC e Online dataUser’s Manual Parallel Interface Interface InformationACK DstbSlct Inprm This signal is used to indicate that data is This signal is set low when the printer isReady to send data to the host. During Data transfer, it is used as data bitFigure C-1 Data transmission timing Data Transmission TimingFigure C-2 Data transmission timing Serial Interface RTSCTS Serial Options When the printer is turned onReady ETX/ACK selectableTD RD Cable WiringFigure C-1 Cable wiring DSR-enabled control Serial Protocols ON/XOFFETX/ACK Basic character sets for DPL24C Plus and IBM XL24E emulation Character SetsUser’s Manual User’s Manual User’s Manual User’s Manual User’s Manual User’s Manual LITHUA1 Lithuanian LITHUA2 Lithuanian MIK User’s Manual User’s Manual User’s Manual User’s Manual User’s Manual Character Sets Ecma ECMA94 USA*2LITHUA2 MIK LATN2-TMacedon ABG ABY PG-MAC ELOT927User’s Manual Using the LCD/LED Type Control Panel Control panel components LCD screen Indicator lightsUnload ButtonsPoints to remember about basic menus Menus and functionsExecutes form feed Changes the font, print quality, and pitch Executes line feedExecuting a micro line feed Executing a form feed or line feedTo execute a form feed or line feed Backward. To invert the arrow, press the ↓↑ but- tonTo reset the printer Resetting the printerTearing off continuous forms To tear off continuous formsChanging print font, quality, and pitch temporarily Letter Report Draft Selecting MENU1 or MENU2 Entering setup mode Enabling or disabling lock modeExiting setup mode Selecting options Using the Setup MenusSelections are not in effect until they are saved Starting functionsExample of operations Save Exit from Setup SELF-TEST AlignmentSaving changed options Selecting options in MENU1 and MENU2Using the Save function Exit from Setup Press F1 until SELF-TEST appears under Func Printing the self-testCorrecting vertical character displacement Online Power-on Special FunctionsStop MessagesUSE Save ExitWhere xxxx is -128 to +127 Where line 001 is the top-of-formInternal test Printer is performing its Appears for 2 seconds immediatelyExit Stop GO Speed Incr Decr MICRO↑ Exit SaveOperational error messages Messages indicating user-correctable problemsLCD model Cover open Cover is open Shut the cover ErrorTable E-5 Warning errors list Table E-5 Warning errors list Buffer overflow Space for download data, or check the format Table E-6 lists nonfatal error messages alphabeticallyDownload data Or check the interface cableCour Messages indicating fatal errorsPrestg CompressFatal Index Index Platen Platen knob IN-4 IN-5 IN-6 Fujitsu Offices C147-E041-05EN