Fujitsu DL6600Pro, DL6400Pro user manual Buffer overflow

				Messages
	Table E–5 Warning errors list (Continued)
	No.	Error name	Error description	Recovery method
6		Transmission	While the printer
		timeout error	attempts to
			transmit data to the
			host, ten seconds
			elapse with the
			output buffer full
			of data.
			• The printer
			ignores the data
			(data is lost).

Note: Incorrect settings on the RS-232C do not always cause parity or framing errors. If the baud rates of the host computer and the printer are multiples of 4800, such as 19200, framing errors are not detectable, and meaningless data indicates a setting error. These errors do not affect the line from the host computer. An error remains if the printer is online and no other warning is displayed until push button operation or an operational error or fatal error is detected. The buzzer sounds each time a download error occurs.

LCD model

A warning error message indicates an interface or data format error while the printer is online. The printer remains online and printing does not stop, but the following happens:

•The ALARM indicator turns red.

•An alarm sounds (unless it was deactivated in setup mode).

For example, the display appears as follows when a buffer control error occurs on the serial interface.

Buffer overflow

The message remains displayed until the printer is placed offline and

the error condition is corrected.USING THE

LCD/LED TYPE

CONTROL PANEL

User’s Manual E-31