Fujitsu DL6400Pro, DL6600Pro user manual Enabling or disabling lock mode, Entering setup mode

Getting Acquainted with the Control Panel

Enabling or disabling lock mode

Lock mode protects the font selected on the control panel from being changed by commands from your application software.

To enable lock mode:

Enter	<Menu>	<Lock>
setup	MENU1	OFF
Enter	<Menu>	<Lock>
setup	MENU1	ON

1.Press NEXT DISPLAY repeatedly until the menu shown at the right appears.

2.Press F3 to switch the option from OFF to ON.

Lock mode remains in effect until the power is turned off. It is not disabled by initializing or re- setting the printer or by changing the emulation.

Entering setup mode

You can specify different settings in advance by entering setup mode. There are many menus in setup mode.

To enter setup mode:

Enter	<Menu>	<Lock>
setup	MENU1	OFF

Offline setup mode

Data will be lost. OK?

No		Yes
Func. ↓	Item ↓	Option ↓
MENU1	EMULATE	DPL24C*

1.Make sure the printer has printed all data. Press NEXT DISPLAY repeatedly until the menu shown at the left appears.

2.Press F1 to enter setup mode. The setup mode opening message shown at the left appears for 2 seconds.

If unprinted data remains in the buffer, the confir- mation message shown at the left appears before the opening message.

Pressing F1 redisplays the original menu (step 1). Pressing F3 clears the data and switches the printer to setup mode (next step).

3.The setup mode initial menu appears.

E-12 User’s Manual