Fujitsu DL6400Pro, DL6600Pro user manual Type Number Ream weight in g/cm Front

Cut Sheets

Cut Sheets	For cut sheets, use high-quality paper with a light reflection factor of
	60 percent or more. Ordinary high-quality white paper has a light
	reflection factor of approximately 70 percent. The darker or thinner
	the paper, the lower the reflection factor.
	1. Size
	Width: 90 to 420 mm (3.5 in to A3 horizontal)
	Length: 90 to 420 mm (3.5 in to A3 horizontal)
	2. Number of parts
	The printer can handle multipart paper. Table 7-3 lists allowable
	combinations for the total number of parts, including the original,
	and the ream weight.
	Table 7–3 Number of parts and ream weight for cut sheets
	Type	Number	Ream weight in g/cm2	Front	Rear*1
		of parts
	Single	1	<35>, 46, 52, 64, 81		
	part
			35, 46, 52, 64, 81, 104,	
			127
	Pressure	2	39, 50, 64, (81)		
	sensi-	3	39, 50, (64, 81)		
	tive*2	4	39, (50, 64, 81)		
		5	39, (50, 64)		
		[6]	39, (50, 64)		
		[7]	39, (50, 64)	
		[8]	39, (50, 64)	
	Carbon-	2	39, 52, 64, (81)		
	backed	3	39, 52, (64, 81)		
	multi-	4	39, (52, 64, 81)		
	part*3	5	39, (52, 64)		
		[6]	39, (52, 64)		
		[7]	39, (52, 64)	
		[8]	39, (52, 64)	

*1 For DL6600 only.

*2 Ream weights for pressure-sensitive and carbon-backed multipart forms may differ slightly according to the manufacturer. Select forms of the closest weight to those in the table.

*3 Do not use carbon paper with cut sheets.

7-8 User’s Manual