Fujitsu DL6400Pro Horizontal tab execution, ESC VT n, Set right margin 0 ≤ n ≤ ESC Q n, Esc O

Fujitsu DPL24C PLUS

			Table B–1 Printer commands in the DPL24C PLUS command set (Continued)
Function				Command
Tabulation				HT
Horizontal tab execution
Set horizontal tabs				ESC D (n1) ... (nk) NUL
n1 to nk are ASCII values of print columns
(at current character width) where tabs are to be set.
(1 ≤	n ≤	255) (1 ≤	k ≤ 255)
Move to print column n (1 ≤ n ≤ 255)				ESC HT (n)
Move dot column n/360 inch (n = n1 + n2 ⋅ 256)				ESC $ (n1) (n2)
The value below is for 136-column printers.
(0 ≤	n1	255) (0 ≤ n2 ≤ 19)
(0 ≤	n2	⋅ 256 + n1 ≤ 4895)		ESC e R (s)
Horizontal relative move by n/360 inch
(–999 ≤		n1 n2 n3 ≤	+999)	(n1) (n2) (n3)
n1, n2, and n3 are the hundreds, tens, and ones digits of the
distance. s is a plus or minus (+ or –) sign.				VT
Vertical tab execution
Set vertical tabs				ESC B (n1) ... (nk) NUL
n1 to nk ASCII are values of lines (at current line spacing)
where tabs are to be set.
(1 ≤	n ≤	255) (1 ≤	k ≤ 64)
Move to line n (1 ≤ n ≤			255)	ESC VT (n)
Page Formatting
Set right margin (0 ≤ n ≤ 255)				ESC Q (n)
Set left margin (0 ≤ n ≤			255)	ESC l (n)
Set perforation skip by n lines				ESC N (n)
(1 ≤	n ≤	127)
Perforation skip off				ESC O
Set page length to n lines				ESC C (n) or
(1 ≤	n ≤	127)		ESC e c (n) or
Set page length to n inches				ESC FF (n)
				ESC C NUL (n) or
(1 ≤	n ≤	22)		ESC e c NUL (n) or
Set page length to n/360 inch (n = n1 ⋅ 256 + n2)				ESC FF NUL (n)
				ESC e f (n1) (n2)
(0 ≤	n1 n2 ≤ 255)
(1 ≤	n1	⋅ 256 + n2 ≤ 7920)

B-6 User’s Manual