Fujitsu DL6400Pro, DL6600Pro user manual Using the Save function

Using the Setup Menus

With the first method, the printer remains in setup mode after saving the changes, allowing you to use different functions in setup mode. With the other methods, the printer saves the changes and then exits from setup mode and redisplays the original basic menu.

If you made changes while in setup mode, the printer prompts you to save the changes. You can save changes permanently or temporarily. Permanent changes become the printer's new default settings. Temporary changes are lost when the printer is turned off.

Using the SAVE function

The SAVE function permanently saves changed options. Use SAVE when you want to select another function after saving. To use the SAVE function, follow these steps:

Func. ↓		Item ↓	Option ↓
MENU1		QUALITY	DRAFT
Func. ↓		Item ↓	Option ↓
SAVE			GO
NOTE: Values have been
	permanently saved.
Func. ↓		Item ↓	Option ↓
SAVE			GO

1.Make sure the printer is in setup mode. If you just completed the previous exercise, the printer is in setup mode with the menu shown at the left.

2.Press F1 until SAVE appears under Func.

3.Press F3 to execute the SAVE function. If the op- tions have been changed, the save execution mes- sage briefly appears, indicating the changed options are now permanently saved. Then the original SAVE menu reappears. If the options were not changed, the original SAVE menu sim- ply reappears.

4.If you want, select another function.

If you are working through the exercises, after completing the exercise on the SAVE function go to the SELF-TEST function on page E-20.

E-18 User’s Manual