Fujitsu DL6400Pro, DL6600Pro Printing the self-test, Press F1 until SELF-TEST appears under Func

Using the Setup Menus

Printing the self-test

The printing self-test is a convenient way to check print quality after making adjustments using the GAP-ADJ or V-ALIGNMENT function. You can start the printing self-test from setup mode.

To start the self-test, load paper in the printer. Then follow these steps:

Func. ↓		Item ↓	Option ↓
SAVE			GO
Func. ↓		Item ↓	Option ↓
SELF-TEST			GO
	Self-test printing
EXIT		STOP	GO

1.Enter setup mode. If you just completed the pre- vious exercise on the SAVE function, the printer is in setup mode with the menu shown at the left.

2.Press F1 until SELF-TEST appears under Func.

3.Press F3 to select GO. The self-test starts with the self-test execution message shown at the left.

Func. ↓	Item ↓	Option ↓
SELF-TEST		GO
Form ↑	Tear off	Line ↑
feed	paper	feed

4.Press F2 to stop self-test printing. Press F3 to re- sume self-test printing.

5.Press F1 to exit self-test mode and return to the SELF-TEST menu.

6.Press ONLINE to exit setup mode. The basic menu reappears.

E-20 User’s Manual