Fujitsu DL6600Pro, DL6400Pro Executing a form feed or line feed, Executing a micro line feed

Getting Acquainted with the Control Panel

Executing a form feed or line feed

To execute a form feed or line feed:

Form ↑	Tear off	Line ↑
feed	paper	feed

Page length = 11.0 inch

feed paper feed

1.Press NEXT DISPLAY repeatedly until the menu shown at the left appears.

2.Check the direction of the arrow displayed in the menu. If the arrow points up ↑ , paper feeds for- ward. If the arrow points down ↓ , paper feeds

backward. To invert the arrow, press the ↓↑ but- ton.

3.Press F1 to feed paper forward (or backward) by the page. As the paper moves forward (or back- ward) on the platen, the control panel briefly dis- plays the page length, as shown at the left.

	Line count = 002
feed		paper	feed

Press F3 to feed paper forward (or backward) by the line. As the paper moves forward (or back- ward) on the platen, the control panel briefly dis- plays the new line count, with 001 indicating the first print line (the top-of-form).

The example here indicates that the paper is posi- tioned to start printing at the second print line.

Executing a micro line feed

To execute a micro line feed (1/180 inch per step):

Reset	Micro ↑	Line ↑
printer	feed	feed

Offset(n/180”) = +008

feed paper feed

1.Press NEXT DISPLAY repeatedly until the menu shown at the right appears.

2.Check the direction of the arrow displayed in the menu. If the arrow points up ↑ , paper feeds for- ward. If the arrow points down ↓ , paper feeds

backward. To invert the arrow, press the ↓↑ but- ton.

3.Press F2 to feed paper forward (or backward) by small increments (or decrements) of 0.14 mm (1/ 180 inch). As the paper moves forward (or back- ward) on the platen, the control panel briefly dis-

USING THE LCD/LED TYPE CONTROL PANEL

User’s Manual E-7