Fujitsu DL6600Pro, DL6400Pro user manual Selecting MENU1 or MENU2

Getting Acquainted with the Control Panel

<Font>↓	<Qual>↓	<Pitch>↓
PICA 10	REPORT	12 CPI

5.Press F3 repeatedly to scroll through the various character spacing options, selecting each in turn.

•10 CPI, 12 CPI, 15 CPI, 17 CPI, 18 CPI, 20 CPI, PROP SP (proportional spacing), 2.5 CPI, 3 CPI, 5 CPI, and 6 CPI

After the changes in this example, the printer prints characters using the pica 10 font, report quality, and 12 cpi so long as the computer commands do not change these options or you do not switch the menu (1 or 2) in the basic menus.

Important:

The actual printed font, print quality, and pitch may differ from the settings displayed in this menu because the options displayed are independent of those specified by commands from the computer.

Selecting MENU1 or MENU2

You can easily select either of the two setup menus, which you can use to change settings while in setup mode.

To select MENU1 or MENU2:

Enter	<Menu>	<Lock>
setup	MENU1	OFF
Enter	<Menu>	<Lock>
setup	MENU2	OFF
Form ↑	Tear off	Line ↑
feed	paper	feed

1.Make sure the printer has printed all data. Press NEXT DISPLAY repeatedly until the menu shown at the left appears.

2.To switch to MENU2, press F2.

3.The printer is initialized 2 seconds later. The orig- inal basic menu reappears.

Important:

Print data buffer is cleared even if the last selected menu is the same as the original.

USING THE

LCD/LED TYPE

CONTROL PANEL

User’s Manual E-11