L05 User’s Manual | 091105.1833 |
SOUND MODE | (MONO / STEREO) |
Select either STEREO or MONO (monaural) sound modes. |
|
Note: STEREO has no effect if the current audio signal is monaural. When SOUND MODE is changed, an
AVL(OFF / ON)
Disable or enable the Automatic Volume Leveling feature, which minimizes variations in audio playback level.
BALANCE | ( |
Adjust the respective audio playback setting. |
|
TREBLE | ( 0 – 100) |
Adjust the respective audio playback setting. |
|
BASS | ( 0 – 100) |
Adjust the respective audio playback setting. |
|
INCREDIBLE STEREO | (NO / YES) |
When INCREDIBLE STEREO is set to YES, and the current SOUND MODE is MONO, a signal processing technique is applied for the purpose of simulating a “stereo- like” effect.
Note: When INCREDIBLE STEREO is set to YES, and the current SOUND MODE is STEREO (regardless of whether there is a stereo signal on the current channel) the resultant effect will be imperceptible, minimal or possibly degraded, depending upon various factors.
ULTRA BASS(NO/ YES)
When ULTRA BASS is set to YES, the audio frequency equalization is modified such that the bass frequencies are significantly emphasized.
VOLUME BAR | (NO / YES) |
When VOLUME BAR is set to YES, an OSD graphic appears that provides visual | |
verification ( e.g.
control, or the front panel (if it is not locked out).
MIN VOLUME( 0 - 100)
Specify the lowest volume setting possible by means of either the remote control, or the front panel (if it is not locked out). This setting cannot exceed MAX VOLUME (see
MAX VOLUME)
Note: The MIN VOLUME setting is effective whether the volume command is issued from the front panel (if it is not locked out), a standard guest- mode remote control, or an RC2573GR setup remote in setup mode.
17
