L05 User’s Manual | 091105.1833 |
TV Setup Menu and Sub-Menus
LANGUAGE(English / Espanol / Francais)
When you first enter the TV SETUP menu, LANGUAGE is highlighted. You can scroll to the LANGUAGE item. Select the desired language with cursor up / cursor down.
CHANNEL INSTALL | (>) |
The CANNEL INSTALL menu allows the user to configure the channels that can be accessed. When installing the channels, different inputs can be mapped to TV channels to allow seamless integration into the channel map. The two sections below explain how to install analog channels and AV inputs, and how to install digital channels.
Installing Analog channels
When selected, CHANNEL INSTALL menu appears as follows. Configure the inputs and channels as described.
| CHANNEL INSTALL |
CHANNEL | TV 1 – 125 |
INPUT | ANTENNA / AV 1 / AV 2 / SIDE / |
| HDMI / HD CVI / DIGITAL |
AUTO PROGRAM | > |
CHANNEL RING | SAVED |
LABEL | > |
VIDEO BLANK |
|
AUDIO MUTE |
|
|
|
∙CHANNEL:
oSelect the channel or input you wish to configure.
∙INPUT:
oSelect the input source that you wish to associate with the specified CHANNEL . This feature enables you to “map”
∙AUTO PROGRAM:
oWhen AUTO PROGRAM is selected, the TV performs an automatic search for the presence of viable RF signals at its tuner input. An AUTO- PROGRAMMING ACTIVE message and a table of channe l numbers will appear. If CABLE TUNING is set to NO, channels 2 through 69 will be checked. If CABLE TUNING is set to YES, channels 2 through 125 will be checked. When a viable signal is detected on a given channel, that channel is highlighted in red and is added to the channel ring. Any command from a remote control terminates the AUTO PROGRAM session.
∙CHANNEL RING:
11
