RUNNING MACROS
RUNNING THE ITR MACRO
You can connect two VCRs (referred to as VCR1 and VCR2 on the
antenna signal (RF) connected to one of the VCRs (VCR1) and to the TV. Then with your VCR in TV mode you can press the ITR/REC button to begin recording a program or to set start and stop times for recording later.
You also can press the ITR/REC button for normal REC recording. In that case, you must have your VCR in VCR mode, and you can record on VCR1 or VCR2, depending on your connection.
BEGINNING ITR
RECORDING NOW
Press the ITR/REC button to bring
the ITR menu to the screen.
Press the CURSOR RIGHT but- ton to select “NOW”; the STOP TIME options will appear.
To choose to record till the end of the tape, press the CURSOR RIGHT button. Then press the CURSOR RIGHT button again to transmit the code to
OR
To input a STOP TIME, press the CURSOR DOWN button to highlight the STOP TIME input area. Then press the CURSOR RIGHT button to be in position to enter the STOP TIME.
Press the CURSOR RIGHT or CURSOR LEFT button to move to each spot in which time numbers can be input. Then press the CURSOR UP or CURSOR DOWN button to input the time; or press the number buttons to do so.
After inputting the STOP TIME,
press the CURSOR RIGHT button.
TRANSMIT CODE and GO will appear on the screen. Then press the
CURSOR RIGHT button again to
begin recording.
Please see the next page for instructions in setting the ITR macro to record later.
11:00 AM
START TIME NOW
-
SLEEP | POWER |
|
PIP
| TV/VCR | ON/OFF | POSITION | FREEZE |
|
| A/CH |
|
|
|
|
| SWAP | SOURCE | PIP CH | 5 | |
|
|
| UP | DN | |
| SOUND |
| PICTURE | 5 | |
5 | MENU |
|
| M LINK |
|
|
|
|
|
| |
| VOL |
|
| CH | 2 3 |
5 4 2 |
| MUTE |
| 4 | |
SOURCE STATUS/EXIT | CC | CLOCK | 5 6 | ||
| ITR/REC | HOME | HOME | PERSONAL |
|
1 |
| VIDEO | MOVIES |
|
|
INCR. SURR. |
| SURF |
| ||
| PROGRAM LIST OPEN/CLOSE | TUNER A/B |
| ||
| OK |
|
|
|
|
11:00 AM
STOP TIME TILL TAPE END -
11:00 AM
TRASMIT CODE
GO
11:00 AM
STOP TIME
TILL TAPE END
11:00 AM
11:00 AM
TRANSMIT CODE
GO
22
