Philips 28PW9520/12 To select connected equipment, Recorder or DVD with EasyLink

Stereo amplifier and two extra front speakers

& Connect the audio cables to the AUDIO input of your amplifier and to AUDIO L and R at the back of your TV.

é The output level is controlled by the volume control of the amplifier.

AUDIO

Note: Switch off the TV and your audio amplifier before connecting them. Set the audio amplifier’s volume to minimum.

To select connected equipment

Press the v key on the remote control repeatedly to select EXT1, EXT2, EXT3* or SIDE according to where you connected your equipment at the back or the right side of your TV.

Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.

* Only available on certain versions.

Recorder or DVD with EasyLink

The recorder (VCR or DVD+RW) or DVD can be operated with the remote control via the Recorder or DVD menu on screen.

Recorder

Òp ‡ π † ® Ï

Rwd Play Stop Play Ffw Rec Eject

DVD

Òp ‡ π † Ï

Prev. Play Stop Play Next Eject

&Press the MENU key on the remote control.

éSelect the Recorder or DVD menu with the cursor up/down.

“Press the cursor left/right, up/down to select one of the recorder or DVD functions.

The key ® for recording can be operated in the TV mode.

If your EasyLink recorder has the system standby function, when you press the B key for 3 seconds, both TV and the recorder are switched to standby.

16