8

Source

This menu allows you to indicate the peripheral
you connected to one of the external inputs.
&Press the cursor right to enter the list of types
of peripherals attached to the selected input.
éSelect the peripheral device with the cursor
up/down.
Once you have selected the source type, e.g. DVD,
this source will automatically be selected when
your remote control is in DVD mode, see p. 3, and
when you press the vkey on the remote
control.
Auto Surround
Sometimes the broadcaster transmits special
signals for Surround Sound encoded
programmes.The TV automatically switches to
the best surround sound mode when Auto
Surround is switched On.
Set/Change code
The Child lock feature (see TV, Features, p. 11)
allows you to lock channels to prevent others
from watching certain programmes.To watch
locked channels, a 4-digit code must be
entered.The Set/Change code menu item
allows you to create or change a Personal
Identification Number (PIN).
&Select Set/Change code.
éIf no code exists yet, the menu item is set to
Set code.
If a code has previously been entered, the menu
item is set to Change code.Follow the
instructions on screen.
Important:You have forgotten your code !
&Select Change code in the General menu and
press OK.
éPress the cursor right and enter the overriding
code 8-8-8-8.
“Press the cursor again and enter a new
personal 4-digit code.The previous code is
erased and the new code is stored.
If a decoder or a descrambler is connected, see
p. 15, you can define one or more programme
numbers as decoder programme numbers.
&Select Decoder with the cursor right.
éSelect Programme.
“Select the programme number under which
you have stored the programme coming from
your decoder.
‘Select Status.
•Select the input used to connect your
decoder: None,EXT1 or EXT2.
•Select None if you do not want the selected
programme number being activated as a
decoder programme number.
Note: Select EXT2 when the decoder is connected
to your EasyLink video recorder.
Decoder
Decoder
Programme
Status
Setup
Source
EXT1
EXT2
EXT3
SIDE
Setup