HDMI-ARC connection
HDMI 1 IN only | OUT Digital home theater |
| |
HDMI cable | amplifier |
| HDMI ARC |
Note
•The HDMI 1 connector is HDMI Audio Return Channel (ARC) compliant. Use it to output Digital Audio to an HDMI home theater system.
•Be sure that the device is HDMI CEC and ARC compliant and that the TV is connected to the device using an HDMI cable attached to
Component Analog Video Connection
Component Analog Video connection offers better picture quality for video devices connected to the unit.
If you connect to the unit’s Component Video (Y/Pb/Pr) Input jacks, connect Analog Audio cables to the Analog Audio (L/R) Input jacks.
| OUT | |
Audio (L/R) cables | ||
or | ||
IN | ||
|
IN | OUT |
| |
Component (Y/Pb/Pr) Video cables | |
| recorder |
Note
• The unit accepts 480i / 480p / 720p and 1080i of video signals for this connection.
15 English
Composite Analog Video Connection
Composite Analog Video connection offers standard picture quality for video devices connected to the unit.
If you connect to the unit’s Composite Video (Y/VIDEO) Input jack, connect audio cables to the Audio (L/R) Input jacks. When the Audio is monaural, then only connect to the Audio L Input jack.
OUT
DVD player
Audio (L/R) + Video cable
IN
Note
•With this unit, yellow cable must be connected to Y (green) jack of Component Video Input jacks.
•Whenever you connect to the Composite Video Input jack (Y/VIDEO), you must disconnect the Component Video Input jacks (Pb and Pr). If you leave those jacks connected, it may cause of an unstable picture.
•Only the left loudspeaker reproduces sound for mono equipment. Use a mono to stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
Connecting the TV to the Internet using an Ethernet cable
Internet
| LAN |
Ethernet cable | Network provisioning |
equipment |
Note
•Please purchase shielded Ethernet cables at your local store and use them when you connect to network equipment.
•After connecting an Ethernet cable, set up necessary network settings. Network ➟ p.37
•Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid damaging the unit.
•If your telecommunications equipment (modem, etc.) does not have broadband router functions, connect a broadband router.
•If your telecommunications equipment (modem, etc.) has broadband router functions but there is no vacant port, use a hub.
•For a broadband router, use a router which supports
•Do not connect your PC directly to the Ethernet port of this unit.
Continued on next page.