Network
Set up network connection settings in order to use Net TV or network upgrade function.
•The meanings of abbreviations are defined as below.
AP: | Wireless LAN Access Point |
WPS: | |
SSID: | Wireless network name |
•The key entry screen will appear when you select SSID, WEP / WPA / WPA2 or Proxy address.
―
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 |
a | b | c | d | e | f | g | h | i | j |
k | l | m | n | o | p | q | r | s | t |
u | v | w | x | y | z | . | - | _ |
|
| Clear | All clear |
| a/A/@ |
| Cancel |
| OK | |
•Enter the key of the selected wireless network using ▲▼◄►, then press OK.
Clear: Clear the entered number or word.
All clear: Clear all the entered numbers or words.
a/A/@: Switch between abc, ABC and @!?
Cancel: Shows the cancellation display.
OK: Set the entered number or word.
1 Use ▲▼ to select Network, then press OK.
Settings assistant | Language | English |
Picture | Channels | Autoprogram |
Sound | Preferences | Location |
Features | Network | Network settings a |
Installation | Restore default settings | Reset AV settings |
Software |
|
|
|
|
|
Network settings assistant
Before you proceed to Connection test or other settings in Network section, run the Network settings assistant to connect the TV to your network.
2 Use ▲▼ to select Network settings assistant, then press OK.
Language | Network settings assistant | Start now |
Channels | Manual network settings | Network selection |
Preferences | Connection test | Start now |
Network | Setting status | Information |
Restore default settings | Home network | Renderer |
| Reset network settings | Start now |
3 Press OK to select Start now.
37 English
Wireless setting
Select to use a wireless LAN to connect to the Internet by wireless connection.
4
This TV can be connected to your | Wireless | |
home network. |
| |
Select your connection type. | Wired | |
If not connected to the network, | ||
| ||
the latest TV software can be |
| |
downloaded from |
| |
www.philips.com/support |
|
Cancel
5 Use ▲▼ to select the desired setting, then press OK, and follow the
| Select this setting if your router has a WPS button. | |
| Start scanning for wireless networks on the TV after | |
Easy connect | pressing the WPS button on your router. If | |
connection test fails, try Easy connect again.*1 | ||
| ||
| If it fails then refer to the router’s manual for more | |
| details. | |
Scan | Search for wireless networks automatically and | |
select the SSID from the list. Wireless network | ||
| setting ➟ p.38 | |
Manual | Set up the connection to the AP (e.g. wireless | |
router) manually by entering the SSID. | ||
|
*1 WPS (Easy Connect) cannot be used when the security protocol is set to WEP. Change the Access Point’s security mode from WEP to WPA or WPA2 (recommended).
Wired setting
Select to use an Ethernet cable to connect to the Internet by wired connection. Please purchase shielded Ethernet cables at your local store and use it when you connect to network equipment.
4
➟ p.39
Manual network settings
2 Use ▲▼ to select Manual network settings, then press OK.
Network settings assistant | Network selection | Wireless |
Manual network settings | Wireless network setting | Auto |
Connection test | IP configuration | IP setting mode |
Setting status | Proxy configuration | Proxy setting |
Home network |
|
|
Reset network settings |
|
|
Network selection |
| |
3 | Use ▲▼ to select Network selection, then press OK. | |
4 | Use ▲▼ to select the desired setting, then press OK. | |
| Wired | If you connect to an Ethernet cable, select Wired |
| to connect to the Internet. | |
|
| |
| Wireless | If you have a router with WPS function, select |
| Wireless to connect to the Internet. | |
|
| |
Continued on next page.
