Philips 29PFL4908/F7 user manual Access the Home menu, Guide to Home menu

forwarding.

Watching channels from an external device

Switching Each Input Mode can easily switch with the remote control between TV (DTV or Analog TV) and external devices when they are connected to the unit.

1 Turn On a set-top box or the connected device.

• The picture from your set-top box or the connected device might appear automatically on the TV screen.

If the picture does not appear

Press SOURCE repeatedly to select the set-top box or the connected device and wait a few seconds till the picture appears.

		e.g.)
		11.1	HDMI1	HDMI2
	TV		DTV / TV channel
	HDMI1
	HDMI2
	HDMI3
	Video
	PC
				Video
			PC	or	HDMI3
				Component
2	• Pressing ▲ reverses the direction of the Input modes.
	Use the remote control of the set-top box or the connected device

to select channels.

Access the Home menu

1 Press (MENU).

Guide to Home menu

d

ae

Watch TVBrowse USBBrowse PC

b			f
Net TV	Add new devices	Setup

c

aWatch TV: Switches back to the antenna source if another source is selected.

bNet TV: Accesses Net TV menus.

cAdd new devices: Adds new devices to the Home menu.

dBrowse USB: Accesses USB menus.

eBrowse PC: Accesses DLNA menus.

fSetup: Accesses menus that allow you to change picture, sound and other TV settings.

21 English

Note

•After selecting Add new devices, follow the on-screen instructions to select the correct device and connector.

Lock or unlock your device from the Home menu

This section describes how to lock or unlock specified device.
1	Press	(MENU) on the remote control.
2	Use ▲▼◄► to select a device to lock or unlock.
3	Press	OPTIONS on the remote control.
4	Use ▲▼ to select Device lock or Device unlock, then press OK.
	• If device lock is unlocked, Device lock will be displayed. If device
	lock is locked, Device unlock will be displayed and will be
5	displayed at the top right of the device icons.
	Enter your PIN. Change PIN ➟ p.33

• Once you have set PIN, PIN input menu does not appear after the unit is Turned on.

Enable or disable RC key forwarding from the Home menu

This section describes how to enable or disable RC key forwarding for a particular device.

1 Press (MENU) on the remote control.

2 Use ▲▼◄► to select a device to enable or disable RC key

3 Press OPTIONS on the remote control.

4 Use ▲▼ to select Enable RC key forwarding or Disable RC key

forwarding, then press OK.

•If RC key forwarding is set to off, Enable RC key forwarding will be displayed. If RC key forwarding is set to on, Disable RC key

forwarding will be displayed and will be displayed at the top right of the device icons.

Note

•This function is available only when your devices are connected to this unit through HDMI cables and assigned to an HDMI port (HDMI 1 to HDMI 3) with Add new devices in the Home menu.