Philips 32PFL3506 user manual Watching a Blu-ray disc, Switching audio mode

Watching a Blu-ray disc

To watch a Blu-ray Disc

1 Insert a Blu-ray Disc into your player.

2 Press ►(play) on the remote control of the Blu-ray Disc player.

»The Blu-ray Disc might automatically play on the TV. If the picture does not appear

1Press SOURCE repeatedly to select the Blu-ray Disc player and wait a few seconds for the picture to appear.

2Use the remote control of the Blu-ray Disc player to play the disc.

Switching audio mode

This section describes how to switch audio language in digital mode and how to switch audio in analog mode.

DTV

1 Press SAP to display the currently selected language and the number of available languages.

11.1

English 1/3

2 Press SAP repeatedly to cycle through the available audio languages.

•Available languages differ depending on the broadcast. [Other] is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French.

Note

•SAP does not control external audio devices.

•The information display will automatically disappear in a few seconds.

TV

Press SAP to display the currently selected audio mode.While receiving an MTS broadcast, press repeatedly to cycle through the available audio channel.

111.1

SAPEnglish/ STEREO1/3

When all audio are available

SAP / STEREO SAP / MONO

SAP / STEREO

When stereo and monaural audio are available

MONO/STEREOMONO/STEREO

When SAP and monaural audio are available

MONOSAP / MONO SAP / MONOSTEREO

When only monaural audio is available

MONO

(Cannot be switched)

STEREO : Outputs stereo-audio

SAP : Outputs second audio program

MONO : Outputs mono-audio

14EN