2.4
Power cable
-Insert the power cable into the POWER connector on the back of the TV.
-Make sure the power cable is securely inserted in the connector.
-Make sure that the power plug, in the wall socket, is accessible at all times.
-When you unplug the power cable, always pull the plug, never pull the cable.
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time.
2.5
Antenna cable
Insert the antenna plug firmly into the ANTENNA socket at the back of the TV.
You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector.
Use this antenna connection for
5
