Audio Out offset
If you cannot set a delay on the Home Theatre System, you can set the TV to sync the sound. You can set an offset that compensates the time necessary for the Home Theatre System to process the sound of the TV picture. You can set the value in steps of 1ms. Maximum setting is 12ms. The Audio out delay setting should be switched on.
To synchronise the sound on the TV . . .
1.Press and select Setup and press OK.
2.Select TV settings > Sound > Advanced > Audio out offset.
3.Use the slider bar to set the sound offset and press OK.
4.Press , repeatedly if necessary, to close the menu.
Audio Out format
If you have a Home Theatre System (HTS)
with multichannel sound processing capabilities like Dolby Digital, DTS® or similar, set the Audio out format to Multichannel. With Multichannel, the TV can send the compressed multichannel sound signal from a TV channel or connected player to the Home Theatre System. If you have a Home Theatre System without multichannel sound processing, select Stereo.
To set the Audio Out format . . .
1.Press and select Setup and press OK.
2.Select TV settings > Sound > Advanced > Audio out format.
3.Select Multichannel or Stereo.
4.Press , repeatedly if necessary, to close the menu.
Audio Out levelling
Use the Audio Out leveling setting to level the volume (loudness) of the TV and the Home Theatre System when you switch over from one to another. Volume differences can be caused by differences in sound processing.
To level the difference in volume . . .
1.Press and select Setup and press OK.
2.Select TV settings > Sound > Advanced > Audio out leveling.
3.If the volume difference is large, select More. If the volume difference is small, select Less.
Press , repeatedly if necessary, to close the menu.
Audio Out leveling affects both the Audio Out - Optical and HDMI ARC sound signals.
Problems with HTS sound
Sound with loud noise
If you watch a video from a plugged in USB flash drive or connected computer, the sound from your Home Theatre System might be distorted.
1.Press and select Setup and press OK.
2.Select TV settings > Sound > Advanced > Audio out format.
No sound
If you cannot hear the sound from the TV on your Home Theatre System, check the following . . .
-Check if you connected the HDMI cable to a HDMI ARC connection on the Home Theatre System. All HDMI connections on the TV are HDMI ARC connections.
-Check if the HDMI ARC setting on the TV is switched On. Go to > Setup > TV settings > Sound > Advanced > HDMI 1
3.7
Blu-ray Disc player
Use a High speed HDMI cable to connect the
If the
3.8
DVD player
Use an HDMI cable to connect the DVD player to the TV. Alternatively, you can use a SCART cable, if the device has no HDMI connection.
10
