TYPICAL PROBLEMS:

These problems are based on phone calls that we have received from Autoweigh Blender users.

The display does not read close to zero when power is turned on, bin empty (plus or minus 10 grams).

*The load cells are not plugged in.

*The weigh bin is not resting properly and freely in its platform or the platform is not resting properly on the bolts that protrude from the load cell enclosures.

*The controller was never calibrated for these load cells or you just did a CLEAR ALL. In this case it will most likely be off by several hundred grams. See LOAD CELL CALIBRATION.

*The load cells are damaged. See CHECKING THE LOAD CELLS

The Controller "RESETS" itself for no reason. This indicates electrical noise or voltage spikes disrupting the processor.

*See WIRING CONSIDERATIONS, ASSEMBLY section.

The ALARM is flashing and the display shows a weight above 100 or below -50 grams. If above 100, the Weigh bin dump valve keeps opening and closing every 6 or 7 seconds.

*There is material in the weigh bin that will not dump out.

*The dump flap may be stuck.

*The load cells are hung up or obstructed.

*The load cells are out of calibration.

*Incorrect grounding is causing wide load cell readouts.

The VERY FIRST DISPENSE

does NOT take place.

After a few seconds the

ALARM begins to flash.

The display says (N

x.x) and is flashing.

*The air supply is not connected or the pressure is set too low.

*The Natural solenoid is not connected properly.

*The 1/2 amp panel front fuse is blown.

*The NATURAL slide gate is jammed. The cylinder mount may be bent.

The NATURAL dispense valve continues to dump repeatedly even though the weigh bin has filled to overflowing. The weight reading is still below 2000.0 grams.

*The weigh bin is not free to move.

*The load cells are jammed.

*The load cells are damaged. See CHECKING THE LOAD CELLS

The system operates but always needs MANY RETRIES to complete a dispense and never seems to "learn" the proper dispense rate.

*Vibration is causing frequent "bailouts" causing large swings in rate adjustment. Increase the BER parameter.

The THUMBWHEEL SWITCHES do not seem to be controlling output. One or more LEDs (bottom row) are on all the time.

*Someone has LOCKED IN a setting using the keypad. See KEYPAD, PROGRAM MODE, SETTING.

*The _SE parameter is LIMITING the thumbwheel switch setting. See KEYPAD, PROGRAM MODE, and PARAMETERS, _SE.

Page 83

Page 82
Image 82
Conair WSB, GB manual Typical Problems

GB, WSB specifications

The Conair WSB,GB represents a cutting-edge advancement in hair styling technology designed for both professionals and everyday users. Known for its versatility, this styling device merges high-performance with user-friendly characteristics to deliver exceptional results.

One of the standout features of the Conair WSB,GB is its dual voltage capability. This allows users to take it anywhere in the world without worrying about voltage inconsistencies, making it an ideal travel companion. The device's sleek and portable design ensures that it is easy to pack while still being robust enough to handle regular usage.

The WSB,GB incorporates advanced heating technology that ensures rapid heat-up times, allowing users to get to styling quickly. With multiple heat settings, the device caters to various hair types and styles, whether it's coarse, fine, or color-treated hair. This customization is essential for achieving the perfect look while minimizing damage.

Another impressive characteristic of the Conair WSB,GB is its innovative ceramic technology. The ceramic plates distribute heat evenly, reducing hot spots that can lead to hair damage. This feature ensures that styling is not only efficient but also gentle on the hair, promoting a healthy shine and reducing frizz for a polished finish.

The device also boasts a swivel cord, which enhances convenience during use by allowing for free movement without the hassle of tangling. This ergonomic consideration is particularly beneficial for professional hairstylists who may need to maneuver around clients during appointments.

Safety is a crucial aspect of the WSB,GB design. It includes an automatic shut-off feature that turns the device off after a period of inactivity, providing peace of mind for users who might accidentally leave it on when finished.

In summary, the Conair WSB,GB offers various features that cater to the modern user’s needs. With its dual voltage, rapid heating capabilities, ceramic technology, swivel cord, and safety features, it stands out in the crowded hair styling market. Whether you’re a professional stylist or someone looking to elevate your everyday look, the WSB,GB is engineered to meet these demands with excellence.