Conair WSB, GB manual Specifications, Appendix B, C C C

SPECIFICATIONS

TPBS013/1199

GRAVIMETRIC BATCH BLENDERS AutoWeigh GB900 Series Models

C

C

C

D	GB920		C
2		1
A			B
		B
D		GB940	C
		4
2			1
		3
A		B	B
D		GB960	C
8		7	4
1		2	3
A			B
		B

FEEDER LOCATIONS

NOTE: Any one of the feeders (A,B,C or D)can be designated position 5 or 6.

B

A

FRONT VIEW

GB920

C

A

SIDE VIEW

GB920/GB940

B

C

FRONT VIEW	SIDE VIEW
GB940/GB960	GB960

MODELS		GB920	GB940	GB960
Performance characteristics
Batch size lbs {g}		19.8 {9000}	19.8 {9000}	19.8 {9000}
Maximum throughput lbs/hr {kg/hr}*		5200 {2359}	3300 {1497}	2124 {965}
Bin capacity - main ingredient	ft3 {liter}	8.5 {240.7}	6.7 {189.7}	3.6 {102.9}
Bin capacity - minor ingredient	ft3 {liter}	NA	3.6 {107.6}	3.6 {107.6}
Maximum number of materials		6	8	10
Number of discharge valves		2	4	6
Number of additive feeders		up to 4	up to 4	up to 4
Control software (# of components)		4 or 12	4 or 12	12
Dimensions inches {mm}
A - Height above mounting plate†		74 {1880.7}	74 {1880.7}	74 {1880.7}
B - Width‡		56 {1421.4}	56 {1421.4}	56 {1421.4}
C - Depth‡		34 {863.6}	34 {863.6}	34 {863.6}
D - Controller height		11.25 {285.75}	11.25 {285.75}	11.25 {285.75}
E - Controller width		12.25 {311.15}	12.25 {311.15}	12.25 {311.15}
F - Controller depth		8.19 {208.03}	8.19 {208.03}	8.19 {208.03}
Weight lbs {kg}
Installed		480 {218}	480 {218}	480 {218}
Shipping		600 {272.2}	600 {272.2}	600 {272.2}
Voltage Running load amps§
120V/1 phase/60 hz (control and mixer)		8.5	8.5	8.5
220V/1 phase/60 hz (control and mixer)		4.25	4.25	4.25
220V/1 phase/50 hz (control)		0.15	0.15	0.15
220V/3 phase/50 hz (mixer)		2.2	2.2	2.2
400V/3 phase/50 hz (mixer)		1.1	1.1	1.1
Compressed air requirements
Discharge valves	80 psi @ 0.2 ft3/min {5.5 bars @ 0.09 liters/sec}; 1/4 in. NPT fitting
Compressed air feeder	40 psi @ 2.0 ft3/min {2.8 bars @ 0.94 liters/sec}; 1/4 in. NPT fitting
Maximum loader sizes **
Number of 20 inch loaders		2	2	3
Number of 15 inch loaders		2	4	6

CONTROL

MOUNTING INTERFACE

IBO4

SPECIFICATION NOTES:

*Maximum throughput rates are based on 35 lbft3 pelletized material and using all dispense valves. Use of feeders for minor ingredients will reduce this rate. Refer to the selection guide for more specific throughput information.

†The optional flow control valve will add 6.5 in. {165 mm} to the total height. We recommend using the flow control valve when mounting the blender to a stand, surge bin or hopper.

‡Feeders will increase depth dimensions. Please refer to feeder specification.

§Each auger feeder requires an additional 1 amp @ 120V or 0.5 amp @ 240V.

**Maximum loader sizes may be used only when the loader is adjacent to loaders of a smaller diameter.

One Conair Drive ● Pittsburgh, PA 15202 ● 412-312-6000 ● FAX 412-312-6227 ● www.conairnet.com

APPENDIX B