Conair WSB Material Usage Information, PARAMETER, PRT The printout looks like this, Date, Time

MATERIAL USAGE INFORMATION

Pressing the VIEW key followed by the * key will cause all material usage totals to be printed. The (*54) flag need not be on. These totals are since the last time printed, and since the last time cleared.

This same information may be periodically, and automatically, printed by setting the PRT parameter to a time interval number. (See

PARAMETER, PRT)

The printout looks like this:

		DATE	TIME
	CURRENT	6/20/91	13:40:14
LAST	PRINTED	6/20/91	13:35:11
LAST	CLEARED	6/19/91	20:02:36

	TOTALS:		GRAND	PCT	CURRENT	PCT
CYCLES			11		7
COMP 1	R 05.0		2.4	4.8	1.5	5.0
COMP 2	N 100		47.4	100.0	28.6	100.0
COMP 5	N 00.5		.4	.99	.2	.99
COMP 6	N 00.5	.4	.94		.2	.91
TOTAL			50.8	30.7
WEIGH SCALE ID# 120
TOTALS	ARE IN	POUNDS
POUNDS	PER HOUR		365.3

The Totals may be in POUNDS or KILOS depending on your selection of weight unit. See: PROGRAM mode, (*89).

A line is printed for each active component. Each line shows component number, type, setting, grand and current totals.

The GRAND totals will continue to grow until they are intentionally cleared. This is done by the *00 routine, or pressing 00 within 5 seconds after printing these totals.

The CURRENT totals are since the last time totals were printed. The date and times are given for LAST CLEARED and for LAST PRINTED.

The percentages given for "R" types (REGRIND) are percentages of the total mix. Percentages given for "A" types (ADDITIVES) are percentages of all the "N" types added together. Percentages given for "N" types (NATURALS) are each component's percentage of all the "N" types added together.

The POUNDS PER HOUR is calculated using the total material dispensed from the CURRENT column, and the time difference between the CURRENT time and the LAST PRINTED time. Cycle time variations will cause this number to not be exact. The longer the time period, the more correct the rate.

Page 81