+

--------------------------------------------------------------------

+

¦

PART II - OPERATION

¦

+

--------------------------------------------------------------------

+

LOAD CELL CALIBRATION

NOTE: Displays shown here are in full grams. 100 and 200 series models are in 1/10 grams, with a decimal.

If your load cells already display a weight close to zero, plus or minus 10 grams, you may skip this section and go directly to:

TURNING ON OUTPUTS (next page).

If your unit DOES NOT display an acceptable weight, you should recalibrate them, that is reset your ZERO weight, at this time.

To do so:

 

 

 

 

BE SURE the weigh bin

is EMPTY.

 

 

BE SURE the load

cell

plug is plugged into the side of the controller.

BE SURE the weigh bin

is resting

on the load cells freely.

 

BE SURE the air line to the dump

valve is connected as it

would be

during normal

operation.

A disconnected air line

adds weight.

BE SURE The load

cells and bin are not jammed in any way. To test for

this see

that

a light touch on the bin causes the

display to

change.

When

the pressure is removed the display

must return

to exactly where it was,

plus or minus 1 gram.

 

If this does not happen, something is touching something and the bin is not entirely free to move. Check EVERYTHING around the bin.

LOAD CELL CALIBRATION:

The sequence of keystrokes is as follows:

Press:

*

Display will say:

(PASSWORD)

Press:

22222

Display will say:

(P

x)

Press:

*99

Display will say:

(CAL

OFF)

Press:

*

Display will say:

(CAL

ON )

Press:

EXIT

Display will say:

(P

x)

Press:

ZERO

Display will say:

(--WAIT--)

 

 

followed by:

(P

0)

Press:

EXIT

Display will say:

(

x)

The ZERO point of the load cells is now set properly. FULL weight calibration may also be done at this time, however, it probably is NOT NECESSARY. When load cell readings shift due to rough handling, the entire range of readings from ZERO to FULL shift together. The ZERO weight calibration routine resets the full range of the cells and, therefore, corrects FULL weight readings as well. For information on FULL weight calibration, see RECALIBRATION OF LOAD CELLS.

+---------------------------------------------------

+

¦ PROCEED TO:

TURNING ON OUTPUTS

¦

¦

and MATERIAL TYPES

NEXT PAGE ¦

+---------------------------------------------------

+

Page 15

Page 14
Image 14
Conair WSB, GB manual Part II Operation Load Cell Calibration, Cal Off, Zero, Proceed to Turning on Outputs

GB, WSB specifications

The Conair WSB,GB represents a cutting-edge advancement in hair styling technology designed for both professionals and everyday users. Known for its versatility, this styling device merges high-performance with user-friendly characteristics to deliver exceptional results.

One of the standout features of the Conair WSB,GB is its dual voltage capability. This allows users to take it anywhere in the world without worrying about voltage inconsistencies, making it an ideal travel companion. The device's sleek and portable design ensures that it is easy to pack while still being robust enough to handle regular usage.

The WSB,GB incorporates advanced heating technology that ensures rapid heat-up times, allowing users to get to styling quickly. With multiple heat settings, the device caters to various hair types and styles, whether it's coarse, fine, or color-treated hair. This customization is essential for achieving the perfect look while minimizing damage.

Another impressive characteristic of the Conair WSB,GB is its innovative ceramic technology. The ceramic plates distribute heat evenly, reducing hot spots that can lead to hair damage. This feature ensures that styling is not only efficient but also gentle on the hair, promoting a healthy shine and reducing frizz for a polished finish.

The device also boasts a swivel cord, which enhances convenience during use by allowing for free movement without the hassle of tangling. This ergonomic consideration is particularly beneficial for professional hairstylists who may need to maneuver around clients during appointments.

Safety is a crucial aspect of the WSB,GB design. It includes an automatic shut-off feature that turns the device off after a period of inactivity, providing peace of mind for users who might accidentally leave it on when finished.

In summary, the Conair WSB,GB offers various features that cater to the modern user’s needs. With its dual voltage, rapid heating capabilities, ceramic technology, swivel cord, and safety features, it stands out in the crowded hair styling market. Whether you’re a professional stylist or someone looking to elevate your everyday look, the WSB,GB is engineered to meet these demands with excellence.