Conair WSB Keypad - Summary Description, RCP: Enter and retrieve stored RECIPES, Print parameters

KEYPAD - SUMMARY DESCRIPTION

Detailed explanations are given on the pages that follow.

AUTOMATIC OPERATION MODE: (normal operation on power up)

VIEW: View Data: date, time, cycles, and each component weight. Press VIEW,* to print data.

RCP: Enter and retrieve stored RECIPES.

BTCH: View BATCH data: Target Weight, Current Portion, Accumulated Total, and Batch Count. CE = clear displayed field.

FAST: Run rapid FAST cycles after a normal weighed cycle.

TAG: Tag Work Order and Operator numbers to all reports.

EXIT: Press to EXIT all sequences from ALL MODES.

SET: Press to review or change settings.

CE: Press to display "raw signal" weight readout for 3 seconds.

MANUAL MODE: Press: "*"; then (11111) or your own 5 digit password.

OPER: Operate all devices manually; open and close valves.

TIME: Operate devices for a selected time period.

CAL: Operate devices to learn rate.

Above keys use 1 through 9, A, B, C, DUMP, MIX, HOLD, ALARM. ZERO: Zero the tare weight with the bin empty.

FULL: Using known weights, enter gram weight to calibrate load cells.

*00 Clear DATA fields.

*99 Set flag to enable weight calibration of load cells.

PROGRAM MODE: Press: "*"; then (22222) or your own password.

SET: Enter settings if access in Automatic mode has been locked out.

PARA: View or change system parameters. Press PARA for next in list, "*" for previous, SET for next table, VIEW for previous table.

STAR FUNCTIONS: Press * and two numbers for the following functions:

*02	Extrusion and Yield Control.	*52	Double dump weigh bin.
*03	Four digit (xx.xx) settings.	*54	Print cycle information.
*04	Simulate FOUR software.	*66	GB/WSB I.D. number (1-255).
*05	Inhibit table clearing.	*69	Regrind as second natural.
*11	DATE - TIME, real-time clock.	*71	Color percent of blend.
*12	Move table from ROM to RAM.	*72	Additive percent of blend.
*23	Move from RAM to EEPROM.	*74	Stop, alarm MAX wt exceeded.
*32	Move from EEPROM to RAM.	*75	Alarm on weight drop.
*14	Set types: REG, NAT, ADD, OFF.	*77	Print parameters.
*25	ROM OK flag, "CE" to clear.	*78	Change program mode PASSWORD.
*33	Special Alarms.	*82	Precision Ratioing.
*44	End cycle - bin full.	*87	VOLUMETRIC operation.
*45	Change MANUAL mode password.	*88	Print display readout.
*47	Totalizer flag.	*89	Select pounds, kilos.
*48	Dispense range xx.x to xxx.	*98	Display raw weight number.

Use "*" key to select readout or toggle flags ON or OFF.

Page 29