Conair WSB, GB manual Specifications, Appendix B

SPECIFICATIONS

TPBS015/0700

GRAVIMETRIC BATCH BLENDERS Autoweigh GBM Series Models

MODELS	GBM22	GBM31	GBM40
Performance characteristics
Batch size lbs {g}	.882 {400}	.882 {400}	.882 {400}
Maximum throughput lbs/hr {kg/hr}*	97 {44}	111 {50}	132 {60}
Bin capacity - large bins ft3 {liter}	0.4 {11.3}	0.4 {11.3}	0.4 {11.3}
Maximum number of materials	4	4	4
Number of standard dispensing valves†	2	3	4
Number of micro dispensing valves	2	1	0
Control software (# of components)	4 or 12	4 or 12	4 or 12
Dimensions inches {mm}
A - Height above mounting plate	27.25 {693}	27.25 {693}	27.25 {693}
B - Width	21.75 {552.4}	21.75 {552.4}	21.75 {552.4}
C - Depth	21.75 {552.4}	21.75 {552.4}	21.75 {552.4}
D - Controller height	11.25 {285.75}	11.25 {285.75}	11.25 {285.75}
E - Controller width	12.25 {311.15}	12.25 {311.15}	12.25 {311.15}
F - Controller depth	8.19 {208.03}	8.19 {208.03}	8.19 {208.03}
Weight lbs {kg}
Installed	70 {32}	70 {32}	70 {32}
Shipping	90 {41}	90 {41}	90 {41}
Voltage Running load amps
120V/1 phase 50/60 hz	1.0	1.0	1.0
220V/1 phase 50/60 hz	0.5	0.5	0.5
Compressed air requirements
	40 psi @ 1 ft3/min { 2.8 bars @ 0.47 liters/sec}
		1/4 in. NPT fitting
Material filling options
Self-contained vacuum loader		ML8 or Z2HL
Central vacuum receiver		DL8
Hand-fill		flat lid

CONTROL (REMOTE MOUNTED)

MOUNTING INTERFACE

SPECIFICATION NOTES:

*Maximum throughput rates are based on using all dispense valves and dispensing no more than 1.0% colorant and/or additive per each micropulsing valve. Refer to the selec- tion guide for more specific throughput infor- mation.

†The Regrind position features a 1.5-inch diameter valve to ensure flow or irregularly shaped material.

If you will be using this blender for central blending applications, it will be necessary to use a flow control valve with an air solenoid.

One Conair Drive ● Pittsburgh, PA 15202 ● 412-312-6000 ● FAX 412-312-6227 ● www.conairnet.com

APPENDIX B