3.Select Channel installation > Automatic channel update > Off.
Start an update
To start an update yourself . . .
1.Press and select Setup and press OK.
2.Select Search for channels and press OK.
3.Select Update channels and follow the instructions on screen. The update may take a few minutes.
In certain countries, the Automatic channel update is done while watching TV or any moment when the TV is in standby.
New channels
New channels added with the automatic channel update are easy to find in the channel list New. The same new channels are also stored in the All or Radio channel list.
New channels are kept in the channel list New as long as you don't mark them as a favourite or tune to them.
Reinstall channels
You can search for and reinstall channels and leave all other TV settings untouched. Alternatively, you can do a full new TV installation.
If a child lock code is set, you will need to enter this code before you can reinstall channels.
Reinstall channels
To reinstall the channels only . . .
1.Press and select Setup and press OK.
2.Select Search for channels >
3.Select the country where you install the TV.
4.Select Antenna
Full installation
To redo a full TV installation . . .
1.Press and select Setup and press OK.
2.Select TV settings > General settings > Reinstall TV and press OK. The installation may take a few minutes. Follow the instructions on screen.
Factory settings
Factory settings sets the TV back to the original TV settings for picture and sound. To switch back to the original Factory settings . . .
1.Press and select Setup and press OK.
2.Select TV settings > General settings > Factory settings and press OK.
3.Press OK to confirm.
4.Press , repeatedly if necessary, to close the menu.
Channel list copy
Introduction
Channel list copy is intended for dealers and expert users. In some countries, Channel list copy is only availble for copying satellite channels.
With Channel list copy, you can copy the channels installed on one TV onto another Philips TV of the same range. With Channel list copy, you avoid the
Conditions
-Both TVs are from the same year range.
-Both TVs have the same hardware type. Check the hardware type on the TV type plate on the back of the TV. Typically noted as Q . . . LA
-Both TVs have compatible software versions.
Current version
You can check the current version of the TV software
with Current software info in > Setup > Software settings.
Copy channel list
To copy a channel list . . .
1.Switch on the TV which has its channels installed. Plug in a USB memory device.
2.Press and select Setup and press OK.
3.Select TV settings > General settings > Copy channel list > Copy to USB and press OK. To copy the channel list from this TV, you might be asked to enter the Child lock code you entered during the installation.
4.When copying is done, unplug the USB memory device.
Now you can upload the copied channel list onto another Philips TV.
Upload channel list
Upload a copied channel list
Depending on whether your TV is already installed or not, you must use a different way to upload a channel list.
To a TV that is not yet installed
1.Plug in the power plug to start the installation and select language and country. You can skip Search for channels. Finish the installation.
2.Plug in the USB memory device that holds the channel list of
21
