Philips 32PW9788 Programming radio stations, Automatic programming, Manual programming, Give name

Models: 32PW9788

1 132
Download 132 pages 60.57 Kb
Page 24
Image 24

Programming radio stations

You can store up to a total of 50 radio stations.

Automatic programming

Press the ® key on the remote control for about 3 seconds. SEARCH is displayed and all the available stations are programmed (overriding all former programmed radio stations).The system will store first the RDS stations with a strong enough signal, then the RDS stations with a weaker signal and finally the non RDS stations.

Note:

-to stop the automatic installation, press the key. All stations before the stop, are stored into the memory.

Manual programming

&Briefly press the ® key on the remote control. The current station number starts flashing and the station name, in case of a RDS station, or the tuned frequency is displayed.

éHold down the Ò or key to start the search for a new radio station.The search will stop on the next radio station and display the tuned frequency which will eventually be replaced by the detected RDS name.

Note: briefly and repeatedly press the Ò or key to fine tune the frequency if necessary.

Use the P- or + key or the digit keys to select the station number where you want to store the new radio station.

Press the ® key to store the new radio station on the selected station number.

(Repeat & to to store another radio station.

Note: To stop the manually installation, press the key. Nothing is stored and everything is restored to the radio status just before entering the manual installation mode.

Give name

&Select the station number of the radio station you want to assign a name (for stations without RDS reception) or to change the name.

éPress and hold the b key on the remote control for about 3 seconds.The cursor flashes on the first of 8 characters.

Press the cursor up/down to change the character.

Press the OK key to confirm the new name.

Note: To erase a station name:

-Select the station number you want to erase the name of.

-Press and hold the b key for about 3 seconds.

-Press and hold the key for about 3 seconds.

-The message DELETED appears and the RDS name or the frequency is displayed.

22

Page 24
Image 24
Philips 32PW9788 manual Programming radio stations, Automatic programming, Manual programming, Give name