Side connections
S•VIDEO
VIDEO
AUDIO
1 2 3
Camera or Camcorder
&Connect your camera or camcorder as shown.
éConnect to VIDEO 2 and AUDIO L 3 for mono equipment. For stereo equipment also connect AUDIO R 3.
Do not connect cable 1 and 2 at the same time. This may cause picture distortion !
Headphone
&Insert the plug into the headphone socket L as shown.
éPress ¬ on the remote control to switch off the internal loudspeakers of the TV.
The headphone impedance must be between 8 and 4000 Ohm. The headphone socket has a 3.5 mm jack.
In the Sound menu select Headphone volume to adjust the headphone volume.
Wired rear loudspeakers
SURROUND
|
| 13 V DC in |
| ||
| AUDIO in |
|
| ||
|
| (TV) | 4 | /15W | |
| 2.8V RMS | R | L | ||
1 | 4 | 4 | |||
|
| ||||
2 | 3 |
|
|
| |
1 2
3
®
When no wireless RF surround sound is possible or when there is too much interference you can still enjoy Dolby Pro Logic II and Dolby Digital surround sound by connecting the wireless receiver box to the TV with a stereo cinch to stereo 3.5 mm jack cable.
&Connect the (not supplied) cable to the AUDIO IN (TV) connector 4 at the wireless receiver box and the R and L surround outputs at the back of the TV.
éSelect Off in the Wireless surround menu item of the Setup, Speakers menu, p. 9.
Connect extra subwoofer
SUBW. |
To enhance the sound reproduction of your TV you can connect an externally powered subwoofer (between 20 and 250 Hz).
&Connect the audio cable of the external subwoofer to the SUBW. socket at the back of your TV.
é Select External in the Setup, Speakers menu, Subwoofer, p. 9.
For details, please refer to the subwoofer’s manual.
28
