Philips 52PFL8605S/98 Use timers, Use child and rating locks, Set or change the child lock code

Use timers

You can set timers to switch the TV to standby at a specified time.

Automatically switch the TV to standby (sleep timer)

Sleep timer switches the TV to standby after a pre-defined period of time.

Tip

•• You can always switch off your TV earlier or reset the sleep timer during the countdown.

1 When watching TV, press (Home). »» The home menu appears.

2 Press the Navigation buttons to select [Setup], then press OK.

3 Select [Advanced TV settings] and press OK.

4 Select [Preferences] > [Sleeptimer] and press OK.

»» The [Sleeptimer] menu appears.

5 Press the Navigation buttons to set the sleep time.

»» The sleep timer can be set up to 180 minutes, in steps of five minutes. If set to zero, the sleep timer is switched off .

6 Press OK to activate the sleep timer. »» The TV switches to standby after the

pre-defined period of time.

7 Press (Back) to exit the menu.

Use child and rating locks

You can prevent your children from watching TV by locking the TV and using age ratings.

Set or change the child lock code

1	When watching TV, press (Home).
2	»» The home menu appears.
	Press the Navigation buttons to select
3	[Setup], then press OK.
	Select [Automatic channel search] >
	[Advanced channel settings], then press
4	OK.
	Select [Child lock] > [Set code]/[Change
	code].
	»» The [Set code]/ [Change code] menu
5	appears.
	Enter the code with the Numeric
6	buttons.
	Press OK.
	»» A message appears to confirm that
7	your code is set.
	Press (Back) to exit.

Tip

•• If you forget your code, enter ‘8888’ to override any existing codes.

E n g l i s h

EN 17