Set-top box STB
Use 2 antenna cables to connect the antenna to the
Next to the antenna connections, add an HDMI cable to connect the
Next to the antenna connection, add an HDMI cable to connect the device to the TV. Alternatively, you can use a SCART cable if the device has no HDMI connection.
Switch off timer
Deactivate the Switch off timer, if you only use the remote control of the Satellite receiver. Do this to prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV.
To deactivate, press h and select S Setup and press OK. Select TV settings > General settings > Switch off timer and set the slider bar to 0.
Switch off timer
Switch off this automatic timer, if you only use the remote control of the
To switch off the Switch off timer, press h and select S Setup and press OK.
Select TV settings > General settings > Switch off timer and set the slider bar to 0.
Satellite receiver
Connect the dish antenna cable to the Satellite receiver.
Home Theatre System (HTS)
Connect
Use an HDMI cable to connect a Home Theatre System (HTS) to the TV. You can connect a Philips Soundbar or an HTS with a
Alternatively, you can use a SCART cable if the device has no HDMI connection.
HDMI ARC
If your Home Theatre System has an HDMI ARC connection, you can use any HDMI connection on the TV to connect. All HDMI connections on the TV can offer the Audio Return Channel (ARC) signal. But once you connected the Home Theatre System, the TV can only send the ARC signal to this HDMI connection.
With HDMI ARC, you do not need to connect the extra audio cable. The HDMI ARC connection combines both signals.
12 | Setting up / Connect devices |
